PDA

View Full Version : 18 Mode


Custom Search


redhotrob
04-05-2008, 04:46 PM
I know all about 25, 36 and 47 modes, but does anyone have any info on 18 mode.

mikeena
04-07-2008, 09:29 PM
NEVER HEARD OF IT. Where did you get that mode from.

nmfaxman
04-07-2008, 10:10 PM
18 code is for the factory adjustments and programming.
DFW (don't fool with)

mikeena
04-07-2008, 10:50 PM
what models

rocky246
04-08-2008, 12:13 AM
You can disable mode 18 by setting soft switch 30 to a 0. Found on DI551,650,5510, & 7210 models.

mikeena
04-08-2008, 12:32 AM
is this a back door for service mode. i know when i have gone to school some of the teachers show this way just in case you change the tech mode password a backdoor into the machine however wont show you how. Then when you call tech support you have to replace a board.

rocky246
04-08-2008, 04:43 AM
The back way into service mode is to select whatever mode you want to go into by holding down the number keys for the mode you want and turn the machine on. You can change the service password in 25 mode once your in. Turn machine off and on to exit.

Custom Search