PDA

View Full Version : BH-C-353, squealing noise.


Custom Search


Hansoon
05-22-2014, 08:33 PM
BH-C-353 making a squealing noise coming from the fuser drive section.

I believe it is caused by a rusty CL6 clutch (#A02E M200 00, page 44 pos. 30).

Did any of you guys tried the brutal method of just flushing from outside that clutch with brake cleaner or even WD-40 (shows how desperate I feel....) or am I condemned this coming Friday to go on the thorny path to remove those trillion screws and parts to reach that $%&! clutch.

Any good suggestions please for an alternative solution and I'll buy you a bunch of good cold German beers....

Hans

emujo
05-22-2014, 08:56 PM
Replace the MFP....this is an alternate method of alleviating the noise, and much easier than replacing the clutch...let me know when I can give you the address for those cold beers...Emujo

EarthKmTech
05-23-2014, 12:09 AM
If it is the clutch im thinking your talking about, ie, the one inside the fuser drive assy that actuates the colour first transfer rollers i would be replacing it or the complete assembly. Trust me, you dont want to have to go back here twice should the clutch fail 2 weeks later.

There is no easy way of doing this, just setup, sit down and relax and start.

Custom Search