mdm7266
04-06-2008, 12:17 PM
hi there, my problem on konica 7050 is that even though the paper size is correct, indicates on upper tray is 8 1/2 x 14 the image is deleted on the rear side, as if it senses a short bond paper which is 8 1/2 x 11. this happens on trays 1 , 2 and bypass tray.
but if i'll used the program mode 47-93 then make copies, it reproduced good and correct images, no deletion.
on normal mode this deletion occurs. what might be the problem here?
i tried and check the program settings on all trays, they are correct.
before this problem happens, the machine problem is a reduced copies, then i cleaned the main motor bearings, and also the fixing rollers bearings that might help the motor to rorate smoothly. i adjust the horizontal magnificaion to correct the ruduced image then i got the exact copy of the original. the next problem now is what i said above the deleted rear copy. does anyone encountered this problem?
but if i'll used the program mode 47-93 then make copies, it reproduced good and correct images, no deletion.
on normal mode this deletion occurs. what might be the problem here?
i tried and check the program settings on all trays, they are correct.
before this problem happens, the machine problem is a reduced copies, then i cleaned the main motor bearings, and also the fixing rollers bearings that might help the motor to rorate smoothly. i adjust the horizontal magnificaion to correct the ruduced image then i got the exact copy of the original. the next problem now is what i said above the deleted rear copy. does anyone encountered this problem?