Muratec MFX 1700/ Imagistics DL 170?

[jpcopy]

Imagistics DL 170-I have a chance to buy some of these machine cheap. They are suppose to cross to the muratec MFX 1700. Are these good machines. Are they a cartridge machine? What is the average copy cost?
Any particular problems. Some have low meters(less than 50k) and some are above 200k. Any info would be appreciated
jp

[JustManuals]

The parts and service manual for this machine is available for purchase at http://www.justmanuals.com/product_info.php?products_id=9559

[jpcopy]

I may be interested in manuals and tec info after I have heard some feed back form tech who have these units in the field
jp

[dqydj]

I guess they aren\'t to bad. we have quite a few of these out there.
most of them run pretty good. Have had some strange problems with some of them but all in all they are ok.
they do use a drum unit and a toner unit.

Post edited by: dqydj, at: 2006/05/15 16:51

[bamadog]

I agree with dqydj. The Muratecs I have worked on were O.K. but did have an a few weird problems sometimes. Muratec help line is pretty good in my experiences with them.

[jpcopy]

Thanks to all that replied. Probably going to try a few
jp