C451 stabilizing image

[cokwax]

Machine indicates "Stabilizing image" and never comes to the Ready state. No error code indicated. Any ideas?

[chivozx]

¿Tienen toner los cartuchos?

¿El nivel de revelador es el adecuado?

Tube un problema similar en un C450 y era por el fusor, no calentaba.

####=============================####

Do toner cartridges?

Levels developer is right?

A similar problem on a C450 and was by the fuser not warming

[tanderson]

It has been awhile, did you find a resolution to the "stabilizing image" message on the C451? I have a C650 doing the same thing. I have replaced transfer belt, all IUs, IDC sensors, print head relay board, print head, memory modules and hard drive. Next step is to push it off the roof.:mad:
Thanks

[cokwax]

It has been awhile, did you find a resolution to the "stabilizing image" message on the C451? I have a C650 doing the same thing. I have replaced transfer belt, all IUs, IDC sensors, print head relay board, print head, memory modules and hard drive. Next step is to push it off the roof.:mad:
Thanks

Wish u started with printer control board!