View Full Version : C451 stabilizing image
cokwax
06-23-2014, 10:30 AM
Machine indicates "Stabilizing image" and never comes to the Ready state. No error code indicated. Any ideas?
chivozx
06-23-2014, 01:51 PM
¿Tienen toner los cartuchos?
¿El nivel de revelador es el adecuado?
Tube un problema similar en un C450 y era por el fusor, no calentaba.
####=============================####
Do toner cartridges?
Levels developer is right?
A similar problem on a C450 and was by the fuser not warming
tanderson
11-04-2014, 04:21 PM
It has been awhile, did you find a resolution to the "stabilizing image" message on the C451? I have a C650 doing the same thing. I have replaced transfer belt, all IUs, IDC sensors, print head relay board, print head, memory modules and hard drive. Next step is to push it off the roof.:mad:
Thanks
cokwax
11-07-2014, 03:16 AM
It has been awhile, did you find a resolution to the "stabilizing image" message on the C451? I have a C650 doing the same thing. I have replaced transfer belt, all IUs, IDC sensors, print head relay board, print head, memory modules and hard drive. Next step is to push it off the roof.:mad:
Thanks
Wish u started with printer control board!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.