PDA

View Full Version : C451 stabilizing image


Custom Search


cokwax
06-23-2014, 11:30 AM
Machine indicates "Stabilizing image" and never comes to the Ready state. No error code indicated. Any ideas?

chivozx
06-23-2014, 02:51 PM
¿Tienen toner los cartuchos?

¿El nivel de revelador es el adecuado?

Tube un problema similar en un C450 y era por el fusor, no calentaba.

####=============================####

Do toner cartridges?

Levels developer is right?

A similar problem on a C450 and was by the fuser not warming

tanderson
11-04-2014, 05:21 PM
It has been awhile, did you find a resolution to the "stabilizing image" message on the C451? I have a C650 doing the same thing. I have replaced transfer belt, all IUs, IDC sensors, print head relay board, print head, memory modules and hard drive. Next step is to push it off the roof.:mad:
Thanks

cokwax
11-07-2014, 04:16 AM
It has been awhile, did you find a resolution to the "stabilizing image" message on the C451? I have a C650 doing the same thing. I have replaced transfer belt, all IUs, IDC sensors, print head relay board, print head, memory modules and hard drive. Next step is to push it off the roof.:mad:
Thanks

Wish u started with printer control board!

Custom Search