View Full Version : C284e Inverted scanner in duplex
Sniwy
06-26-2014, 03:26 PM
I got a problem with a C284e, when I scan in duplex, the rear side comes inverted, how can I solve this?
Thanks in advance
emujo
06-26-2014, 03:45 PM
Check your "binding position" under application/original settings. Should be "auto" but you may have to change the settings to accommodate the way you are positioning paper in the feeder. Emujo
Sniwy
06-26-2014, 11:40 PM
Check your "binding position" under application/original settings. Should be "auto" but you may have to change the settings to accommodate the way you are positioning paper in the feeder. Emujo
Thanks for the answer. That way you said worked :)
blackcat4866
06-27-2014, 12:16 AM
If I remember correctly it's described as SEF: short edge feed (at the leading edge of the original) or LEF: long edge feed (at the leading edge of the original). =^..^=
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.