MFPTech
06-27-2014, 06:09 AM
HI,
Have spent hours and cannot adjust this ADF 611 Skew issue.
Copying from the glass is perfect.
Did ADF height adjustment.
When adjusting the skew it starts getting better only when the screw is all way to the point where the ADF is no longer detected (reed switch and magnet are not seeing each other).
I was wondering if the problem is not the ADF at all but the CCD or the slit glass unit ...
Any ideas please?
Thanks in advance!
Have spent hours and cannot adjust this ADF 611 Skew issue.
Copying from the glass is perfect.
Did ADF height adjustment.
When adjusting the skew it starts getting better only when the screw is all way to the point where the ADF is no longer detected (reed switch and magnet are not seeing each other).
I was wondering if the problem is not the ADF at all but the CCD or the slit glass unit ...
Any ideas please?
Thanks in advance!