Skew adjust for Minolta C552

[connecticcut]

i don't find "skew adjustment" for copier mode (printer mode it s ok)) (technical mode-machine -skew adjustment... maybe other place). Do you have solution, thanks

[Grey]

Re: Skew adjust for Minolta C552

Service Mode/Machine/Skew Adjust.

See 12.4.17 for instructions in manual, page 488.

Grey

[emujo]

Re: Skew adjust for Minolta C552

That skew adjust is for the printhead. ADF is a mechanical adjustment. See the SM, or the installation instructions. Emujo

[connecticcut]

Re: Skew adjust for Minolta C552

hello
i have a skew with original on glass (only copy mode, not print)

[MFPTech]

Re: Skew adjust for Minolta C552

hello
i have a skew with original on glass (only copy mode, not print)

Check the trays and if the skew is from all trays then check the 2/3 mirror adjustment and scanner adjustment.
Good luck!