PDA

View Full Version : Konica 601/751 Error C-6708


Custom Search


brianho80
07-12-2014, 04:05 PM
Hi expert,

i cannot solve the above error code which is "AGC adjustment level abnormality"

Action that i have been carried out was replacing exposure lamp; board beside lamp; CCD board ; ribbon connector and image processing board.

This error code still occur after few days and it can be reset (after several tried) and resume to normal which can operate for another 1 , 2 days or less than that.

what should i do next to resolve this problem? can anyone advise?

tulintron
07-14-2014, 10:43 PM
Hi expert,

i cannot solve the above error code which is "AGC adjustment level abnormality"

Action that i have been carried out was replacing exposure lamp; board beside lamp; CCD board ; ribbon connector and image processing board.

This error code still occur after few days and it can be reset (after several tried) and resume to normal which can operate for another 1 , 2 days or less than that.

what should i do next to resolve this problem? can anyone advise?


You made ​​correct procedures. Remains firmware upgrade.

Custom Search