PDA

View Full Version : Dead Machine Bizhub C250 Hour glass


Custom Search


darkdjproject
07-15-2014, 11:19 AM
Hello all,

I have a Develop Ineo+ 250 which is the same as the KM Bizhub C250.
My machine stuck on the hour glass when power on.
After contact with a company, they advised me to unplug the Hard Disk Drive, and Change the Memory, this didn't had any impact :(.

Now i read often that this is a firmware error or NVRam problem.

Is here someone who could help me with this problem or getting the firmware for this machine to fix the problem?

I read the old topic: http://www.copytechnet.com/forums/konica-minolta/62025-c250-hourglass-after-power-failure.html
Which is outdated yet, and the download doesn't work anymore:(.

To not bump a old thread i started a new one.

Thanks in advance.

EarthKmTech
07-15-2014, 11:28 PM
is the lcd backlight lit or off ?

i've had this caused by the pwb-m board (no backlight) and the NVRam (backlight on)

You will know if its the pwb-m board as fw reloading will either never start at all or never complete the printer stage

darkdjproject
07-15-2014, 11:59 PM
First of all Thanks for the reply,

The LCD backlight is ON, and turns off after 6 minutes.

copier tech
07-16-2014, 09:08 AM
Just sent you the C250 firmware, try that you might be lucky, let me know.

EarthKmTech
07-16-2014, 01:05 PM
yep, its not your pwb-m board.

you may be lucky with a firmware reload.

Failing this try the nic initialize first before the nvram initialize as i've had nic corruption cause this before too.

Custom Search