darkdjproject
07-15-2014, 11:19 AM
Hello all,
I have a Develop Ineo+ 250 which is the same as the KM Bizhub C250.
My machine stuck on the hour glass when power on.
After contact with a company, they advised me to unplug the Hard Disk Drive, and Change the Memory, this didn't had any impact :(.
Now i read often that this is a firmware error or NVRam problem.
Is here someone who could help me with this problem or getting the firmware for this machine to fix the problem?
I read the old topic: http://www.copytechnet.com/forums/konica-minolta/62025-c250-hourglass-after-power-failure.html
Which is outdated yet, and the download doesn't work anymore:(.
To not bump a old thread i started a new one.
Thanks in advance.
I have a Develop Ineo+ 250 which is the same as the KM Bizhub C250.
My machine stuck on the hour glass when power on.
After contact with a company, they advised me to unplug the Hard Disk Drive, and Change the Memory, this didn't had any impact :(.
Now i read often that this is a firmware error or NVRam problem.
Is here someone who could help me with this problem or getting the firmware for this machine to fix the problem?
I read the old topic: http://www.copytechnet.com/forums/konica-minolta/62025-c250-hourglass-after-power-failure.html
Which is outdated yet, and the download doesn't work anymore:(.
To not bump a old thread i started a new one.
Thanks in advance.