PDA

View Full Version : Jamming C250 intermittent exit jamming


Custom Search


copycart
07-25-2014, 02:42 AM
Swapped fusing units, transfer roller unit, cleaned registration, exit rollers, have new feed rollers. Jams on letter R or 11 X 8 1/2. Actually jams in the fuser, paper is about 1/4 the way out of the exit ass'y.

avecosat
07-25-2014, 07:25 AM
The exit sensor is deformed by heat there is a bulletin.

EarthKmTech
07-25-2014, 12:00 PM
exit sensor is part of the fusing unit.

I assume it was a new fuser you installed, not a old crusty one ?

avecosat
07-25-2014, 12:47 PM
There is a reference for sensor only in infohub...:cool:

habik
07-25-2014, 05:04 PM
Check the gears for wear at the door exit rollers and also the cogs it mesh with to the top right of the fuser section, spring loaded lever maybe broke. Good Luck




Sent from my iDon't believe in marketing device using Tapatalk

Custom Search