View Full Version : Dead Machine Bizhub C5501 error code C3505
copylaser
08-07-2014, 12:36 AM
A little help, does this code need to be reset? I replaced the temp sensor but no help still get code.
Thanx
Mick01
08-07-2014, 04:47 AM
Hi,
Have you set dipswitch 3-1 to 0?
copylaser
08-07-2014, 06:23 PM
A little help, does this code need to be reset? I replaced the temp sensor but no help still get code.
Thanx
Thanx Mick,
we had tried it before the sensor was replaced, so hope it resets with the new sensor in stalled...
Much Obliged.
DA
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.