PDA

View Full Version : C452 in stop printing status


Custom Search


tulintron
08-08-2014, 09:24 PM
stop in printing job list.


Do not print any sheet.


In the job details:


printer ok, shows which input tray to use this drawer.


ng printer, blank input tray shows which drawer to use


Help me !!!!

tulintron
08-08-2014, 09:34 PM
put another C452 side and compared all the configurations.


nothing wrong.


role in all the trays!
2595025951

the first image in the selected item output tray drawer appears.


in the second image, the selected drawer does not appear.


version of the same firmware and enabled hdd.


Help me! Please.


Thanks ...

emujo
08-09-2014, 01:29 PM
You have a consumable at its life stop settings. You must replace the item, or install the PPLM firmware to allow the MFP to continue. The print error could be related, but I would look at the job log to get more details like who sent the job, then delete it. Emujo

copier tech
08-09-2014, 03:10 PM
Try a simple copy off the glass, if this also fails then yes you have a consumable that is at life end.

Go into service mode & check the IU, fuser, transfer & ozone filter lifes & reset as necessary :)

tulintron
08-09-2014, 06:57 PM
You have a consumable at its life stop settings. You must replace the item, or install the PPLM firmware to allow the MFP to continue. The print error could be related, but I would look at the job log to get more details like who sent the job, then delete it. Emujo


Emujo. Many thanks for the information.
in the item "STOP-0-C" IU LIFE STOP was enabled.
Thanks.

Custom Search