eddamen
08-12-2014, 10:59 AM
Hello to all,
I've a Konica Minolta BizHub C450 (european version) with Fierry/EFI controller.
Cause one of the rollers in the fusing unit is peeling of i need to replace the whole unit with a new one.
Can anybody please help me?
I need a schematic or need the steps for replacing this unit.
Have release the 2 screws in front, but the left side of the unit is still blocked. Won't want to damage this unit, so what do i wrong.....?
Thanks for your help!
Ed
I've a Konica Minolta BizHub C450 (european version) with Fierry/EFI controller.
Cause one of the rollers in the fusing unit is peeling of i need to replace the whole unit with a new one.
Can anybody please help me?
I need a schematic or need the steps for replacing this unit.
Have release the 2 screws in front, but the left side of the unit is still blocked. Won't want to damage this unit, so what do i wrong.....?
Thanks for your help!
Ed