View Full Version : Cleaning Procedure for Developer Units C6501

Custom Search

08-13-2014, 03:00 AM
Hi All,

Sorry if this is addressed elsewhere.

I know I need to clean my dev tanks, but I can't find a procedure to clean them safely. I am concerned about damage.

Can someone please assist with instructions.



08-13-2014, 07:41 AM
Hi, fellow Aussie.
I am not really sure what you mean by "clean the dev tanks". Do you mean empty for a dev change? or are they contaminated?

08-13-2014, 07:56 AM
Thanks for getting back to me so quickly.

The dev tanks are contaminated according to the troubleshooting guide I have.

It says I need to clean them but does not say how. The procedure does not appear to be covered in the field service manual.

Cheers SA.

08-14-2014, 06:28 AM
What exactly is the problem?
Can you post a sample?

08-14-2014, 07:02 AM
Sure I can, but in the mean time, can you advise the procedure. I've already done the diagnosis.

The dev tanks are out and waiting already.



08-14-2014, 07:49 AM
I would just drain the dev as you would in a "normal" pm. If you must go further, remove the ATDC sensor. Then hit it with "controlled" compressed air.
They are supposed to be replaced at 600k anyway.

Custom Search