Display panel adjustment setting not showing. - c454e

[Nelo]

Hi Everyone

Got this bizhub c454e, I was gping to adjust the touch panel but the panel adjustment setting in the Accessibility section is not showing. I upgraded firmware but still the same. Is there a software switch I need to turn on for the setting to display. Any ideas that may help solve my issue.

Thanks.

Nelo

[RRodgers]

Hi Everyone

Got this bizhub c454e, I was gping to adjust the touch panel but the panel adjustment setting in the Accessibility section is not showing. I upgraded firmware but still the same. Is there a software switch I need to turn on for the setting to display. Any ideas that may help solve my issue.

Thanks.

Nelo

Same machine that won't do gradation adjustment?!?! I forgot the name of the setting but I'd be willing to bet it has something to do with the admin security level.

[kingarthur]

i know that the touch panel adj has been removed from the set up with the latest firmware, got a feeling the gradation is no longer necessary on set up too...

[jotunn]

Check if software switch 25 is set properly for your firmware.

[Nelo]

Thanks guys will have a try on the security settings and software switch.

[blackcat4866]

Do you have a key counter connected to the machine? A whole lot of functions disappear when you enable the key counter. =^..^=

[rrrohan]

Do a firmware update but hold down reset button when you turn power on same as you would for a trouble reset. This will open a automatic touch panel calibration. Once this is done it will continue on to the firmware update

[mendelieves]

something new? switch 25 no work....