Konica Minolta firmware

[Driti]

Hello there,
I don't know if someone will help me to change the Service Mode code for Konica Minolta machines.
My problem is that I sold a lot of machines and someone is repairing them.

Is there any possibility(or any software) to intervene in firmware before updating the machine.

Driti

[Taminol]

Hello there,
I don't know if someone will help me to change the Service Mode code for Konica Minolta machines.
My problem is that I sold a lot of machines and someone is repairing them.

Is there any possibility(or any software) to intervene in firmware before updating the machine.

Driti

Hi Driti,

I don't understand your question.
Do you mean that the machine displays a telephone number for your client to call when it malfunctions ? Is this what you want to change ?
Or are you trying to change the sequence of numbers to access the engineers mode ?
If it's the latter, I'm afraid the manufacturers code is permanent.

Regards

Taminol

[Driti]

Hi Taminol,
yes I mean the sequence code for accessing Service Mode.

Thanks,
Dritero

[mitchl]

What models are you talking about?

[Driti]

I need for bizhub 163, 210 Di2510 .....

[alexxcopier]

with this one

Di2510 .....

you can change access code even for service mode, but not the way to entering service mode ...

[Taminol]

with this one you can change access code even for service mode, but not the way to entering service mode ...

Can you ? I never knew that.
Come on, spill the beans Alexx, you did end your post with ........

[alexxcopier]

did you ever hear for this :

Enter the 8-digit service code and touch [END]. (Default value: 00000000)

couse i used it

[cobiray]

I think it's in the "stop" "zero" "clear" page in tech mode to change the passcode. Just don't forget what you changed it too.

[knightfall]

yes thats correct stop-0-clear CE authentication