View Full Version : Error Code After changing roller belt unit and fusing unit, says same to change belt and fusing
pakesp
08-21-2014, 01:34 PM
Konica minolta d-color mf3000. It was showing message to change roller belt unit and fusing unit
but i have changed both, but it is showing the same message
and it is showing error 0094 also :( please help
Blizzoo
08-21-2014, 02:24 PM
http://www.copytechnet.com/forums/konica-minolta/49111-error-code-0094-konica-minolta-c35.html
You dont have to replace the fuser or the belt as you can simply reset the counter via a service mode or administrator menu. Sorry cant remember which one exactly .
pakesp
08-22-2014, 04:15 PM
You dont have to replace the fuser or the belt as you can simply reset the counter via a service mode or administrator menu. Sorry cant remember which one exactly .
thanks for your reply
now it is showing error 0094
it is olivetti not konica minolta
same thing regardless c35=MF3000
wseyller
08-23-2014, 03:06 AM
thanks for your reply
now it is showing error 0094
it is olivetti not konica minolta
http://www.copytechnet.com/forums/konica-minolta/49111-error-code-0094-konica-minolta-c35.html
error code 0094 on a Konica Minolta C35
See the above for your 0094 error. There are many other threads I know on this issue if you search it.
Edit: just realized the same link was already posted in this thread.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.