lorskimac
08-22-2014, 11:34 AM
Hello there!
Not sure if I'm in the right place, but wanted to ask for help.
My inherited oki b440dn has a new toner cartridge, I have run several cleaning pages, I have cleaned the laser light strip thingy, I managed to get into the user settings and found that the drum has only made 300 or so copies and I have tried to use different brands of paper. Everything comes out very faintly in grey. I found a black setting in the user settings and changed it from 0 to +2 and now it is a little better, but not stunning. I don't know anything about drums, but do know that it is possible to set the drum count to 0 to fool the printer into keeping going! Perhaps I'm missing something really obvious!
Any ideas?
Thank you for reading
Not sure if I'm in the right place, but wanted to ask for help.
My inherited oki b440dn has a new toner cartridge, I have run several cleaning pages, I have cleaned the laser light strip thingy, I managed to get into the user settings and found that the drum has only made 300 or so copies and I have tried to use different brands of paper. Everything comes out very faintly in grey. I found a black setting in the user settings and changed it from 0 to +2 and now it is a little better, but not stunning. I don't know anything about drums, but do know that it is possible to set the drum count to 0 to fool the printer into keeping going! Perhaps I'm missing something really obvious!
Any ideas?
Thank you for reading