PDA

View Full Version : SHARP SF7370


Custom Search


SO OLD
06-09-2006, 06:18 PM
CAN ANYONE GIVE ME THE SET UP PROCEDURE FOR REPLACING
THE DEVELOPER ON A SHARP SF7370 ? IT HAS BEEN TOO MANY
YEARS SINCE I DONE THIS MODEL. THANKS

choicecopyguy
06-09-2006, 09:27 PM
clear-zero-zero-clear-25-start. Hope this helps.

Phil
06-14-2006, 05:22 PM
If it is a 7320 or 7370 you need to cheat the cabinet switch on the left side of the machine to get the display to light then install the
DV drawer the execute test command C O O C 25 then the CSK(paper selection) then the PRINT switch. It should stir for approx. 3 min. then it will display a number between 01 and 99 which should be the toner level.

Custom Search