View Full Version : Konica minolta bizhub pro 920 the ADF unit is not detect the machine
tariq65
09-09-2014, 09:36 PM
hi every one i am facing problem with Konica minolta bizhub pro 920 the ADF unit is not detect the machine any body help me what i do ? thanx
blackcat4866
09-10-2014, 03:18 AM
Is the correct DF option selected in service mode? Is the DF Isolated? =^..^=
methogod
09-10-2014, 01:04 PM
i have had boards go bad then disapear... i would firmware up if I/O see the sensors in the ADF...
I think i have a few used COMPLETE ADU's if you need one. Also Hytec has the boards for advance exchange (I rely on them once in a while - some good people, some not so good)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.