Docucolor 12 Fuser sensor problem ?

[Sekundes]

hello all,

I`ve just received a dc12 from a friend, and i belive the printer got a little shaken on the way here; the problem is that the paper does not get into the fuser area. I`m geting 10-105 error; from what i`ve read in a error describing manual it means "10-105 - Fuser Exit Sensor - No Paper Sensed". But how can it be a fuser exit sensor since the paper does not even get in the fuser ? Anyone knows where is that sensor located ?..or how can i fix this error problem

thx in advance <3

[xcopytech]

this error mean that paper is not reach fuser exit sensor.

check transport belts, open front door, cheat interlock, remove waste developer bottle and make copy.
then watch what`s happen with paper before fuser assy.

And try to find service manual.