Is it possible to print on labels on this copier? I cant seam to find the option on the bypass table for this media type.
Thank you.
Thank you.
-
-
Re: KM652 printing on labels.
Just choose the corresponding "thick" setting, and if sending as a PDF, choose the "actual size" check box or it will shrink the image somewhat and they wont fit correctly. EmujoIf you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals. -
Re: KM652 printing on labels.
KM does not encourage it, but you can do labels as long as you follow the usual guidelines for any MFP:
1) feed from the bypass tray
2) feed LTR-R direction, never LTR
3) use Thick media type
4) Never partial sheets
In case you want to tell you customer absolutely not, the manual does leave it off the preferred media list.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: KM652 printing on labels.
Thank you all.Comment
Comment