View Full Version : password service bh c452
mik77
09-26-2014, 06:21 PM
hello
I have a bizhub C452 that I swapped. Set the password of the service, of course I do not know.
I tried ...... 1 8-92729272 - 0 .... 0, but nothing to do.
there is some procedure to reset it.
thanks
roberto.bertolani
09-26-2014, 09:27 PM
Hi, I do,
stop 0 0 stop 01
from service mode stop 0C end you rewriting the PWD
bye
emujo
09-26-2014, 09:54 PM
Hi, I do,
stop 0 0 stop 01
from service mode stop 0C end you rewriting the PWD
bye
Hey, I cant seem to access your bank account, do you think you could send me your account# and password??? I mean since you seem to have no issues handing out sensitive info....Emujo
Synaux
09-27-2014, 03:04 AM
Hey, I cant seem to access your bank account, do you think you could send me your account# and password??? I mean since you seem to have no issues handing out sensitive info....Emujo
haha, Emujo! Why are you so grumpy lately
emujo
09-27-2014, 01:39 PM
Cause I'm getting old..and stay off my lawn! Emujo
EarthKmTech
09-27-2014, 11:32 PM
Hi, I do,
stop 0 0 stop 01
from service mode stop 0C end you rewriting the PWD
bye
This is absolutely useless if you dont know the password to enter service mode in the first place.
If you cant access service mode because you dont know the password you will have to use NVRAM recovery jig firmware and completely reconfigure machine again. And not being able to go into service mode before hand means a guaranteed "licence management error" too. You should probably contact KM support.
habik
09-28-2014, 10:05 AM
Hi, I do,
stop 0 0 stop 01
from service mode stop 0C end you rewriting the PWD
bye
Hey Roberto,
I have license code generator. Are you interested?
Sent from my iDon't believe in marketing device using Tapatalk
roberto.bertolani
09-28-2014, 05:15 PM
Hey Roberto,
I have license code generator. Are you interested?
Sent from my iDon't believe in marketing device using Tapatalk
beaucose not !!!! I am very interested ..............
roberto.bertolani
09-28-2014, 05:20 PM
Hey Roberto,
I have license code generator. Are you interested?
Sent from my iDon't believe in marketing device using Tapatalk
because not !!!! I am very interested ..............
mik77
10-01-2014, 10:40 PM
the firmware nv ram recovery can not find it for the C452.
is only available for the C451.
EarthKmTech, can you give me confirmation?
Synaux
10-02-2014, 12:16 AM
Cause I'm getting old..and stay off my lawn! Emujo
http://www.youtube.com/watch?v=z7X2_V60YK8 ?
Synaux
10-02-2014, 12:25 AM
the firmware nv ram recovery can not find it for the C452.
is only available for the C451.
EarthKmTech, can you give me confirmation?
I do not think there is nvram recovery for the c452--under the NVRAM troubleshooting guide (for various models) there is no mention of a recovery firmware.
I believe you are stuck with a NVRAM replacement...
"I have a bizhub C452 (http://www.123inkjets.com/8092-Product.html) that I swapped. Set the password of the service, of course I do not know."
You set the password and forgot?
You are talking about Service Mode--right?
What are you trying to do in Service Mode that you cannot do in Expert Adjust? (assuming you have the admin pass ; )
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.