Maindron1
10-02-2014, 09:18 PM
Hi,
I have been getting this code and I change the developer, it stopped but after about another 3000 copies, it came back again. I have been using generic toner and I wonder if this could be an issue.
I know that I am supposed to clear the counter which I am not sure was done. I know that I am supposed to go to tech mode by the following steps: Utility -->Counter-->stop-0-0-Stop-0-1-->Counter-->Counter Reset. I am not sure if this is the way to reset the counter as I can never see anything. I read about F8 Function but when I go to Function and press F8 I see nothing.
Please, a little help.
Thank you.
I have been getting this code and I change the developer, it stopped but after about another 3000 copies, it came back again. I have been using generic toner and I wonder if this could be an issue.
I know that I am supposed to clear the counter which I am not sure was done. I know that I am supposed to go to tech mode by the following steps: Utility -->Counter-->stop-0-0-Stop-0-1-->Counter-->Counter Reset. I am not sure if this is the way to reset the counter as I can never see anything. I read about F8 Function but when I go to Function and press F8 I see nothing.
Please, a little help.
Thank you.