doma873
04-23-2008, 10:59 AM
Hi All
I have a C500 with a fiery ic901. What is happening is when you print a document in any application it will randomly inverse the image (Like a negitive). eg you can print the same document with no problem then the next time you print it some pages will be inversed. The fiery has v2 software and the copier has the latest firmware. I have swapped the video interface card in the fiery and the interface board in the c500. Also have changed the main control board as well.
Any ideas will be very welcomed.
I have a C500 with a fiery ic901. What is happening is when you print a document in any application it will randomly inverse the image (Like a negitive). eg you can print the same document with no problem then the next time you print it some pages will be inversed. The fiery has v2 software and the copier has the latest firmware. I have swapped the video interface card in the fiery and the interface board in the c500. Also have changed the main control board as well.
Any ideas will be very welcomed.