PDA

View Full Version : error code c-6104 bizhub c224e


Custom Search


reli
10-16-2014, 01:59 AM
hi, I have already change the sensor PS7, motor and the board for the df 701 , any others suggestions.
Thanck you

kingarthur
10-16-2014, 04:51 PM
There was a bulletin about replacing one of the RADF cables

reli
10-17-2014, 03:00 AM
There was a bulletin about replacing one of the RADF cables

Thank you for the reply, to day I replace a complete fede df 701 same problem. I change also the memory same problem.

Bulletin witch number

EarthKmTech
10-17-2014, 12:22 PM
If the second side brush is stalling in the gain adjustment position and the paper stops dead in its tracks and then throws the code, replace the mfp board.

(after you have replaced the black second side CIS cable first as these ALWAYS fail, you have already done this by changing adf, so go ahead with board and let me know)

reli
10-17-2014, 11:41 PM
thank you, I am ordering the mfp board under warranty. I let you know. Have a good week end.

reli
10-07-2015, 03:11 PM
Hi, we replace the machine. But now I am working on the problem at the showroom. so, i am ordering the mfp board. Thank you

B0265
06-08-2016, 03:53 PM
Hi, we replace the machine. But now I am working on the problem at the showroom. so, i am ordering the mfp board. Thank you
Did a new mfp board solve this?

Custom Search