allan
10-16-2014, 10:07 AM
i have a C280 that only develops only half an image in main scan direction. Here is a list of components i replaced in order to no avail.
IU, Dev tank, HV board, Transfer belt, Laser, Drive section, OACB, MFPB, Wiring brkts and wiring. Please if anyone knows what can cause this please let know.
This machine has got me dumb struck. i did check the mylars between the transfer belt an IU's.
IU, Dev tank, HV board, Transfer belt, Laser, Drive section, OACB, MFPB, Wiring brkts and wiring. Please if anyone knows what can cause this please let know.
This machine has got me dumb struck. i did check the mylars between the transfer belt an IU's.