PDA

View Full Version : Imagistics 6020(Bizhub 600) with DF 604 Originals going thru as duplex


Custom Search


Kidaver
10-20-2014, 04:09 PM
I've got 2 of these at a customer, one of them when you feed an original thru the DF it does a single pass on 1 > 1, the other even if set on 1 > 1 it does a double pass as if it's reading both sides. I've looked in admin settings, service mode, and DipSW in manual and do not see anything that would change this setting. Anyone have a idea of where I might find this setting or why it is doing this?

Kidaver
10-20-2014, 04:31 PM
After doing some digging and more vague search parameters I found a TAD that pretty much says update FW so I might have this one solved.

Custom Search