PDA

View Full Version : CQ Bizhub 362 / NEC IT3640D - Toner / Developer ??? Toner smearing, not fusing.


Custom Search


QUALITY IMAGING
10-30-2014, 09:27 PM
I took over some NEC IT-3640D machines and am new to them. I have 3 Machines doing the same thing. What am I missing???? I did Drum & Dev change when it asked for it. New drum unit (OEM), and new DV Bag (OEM). Running generic toner from ACM. Machine sare fine for 10k - 20k and then toner starts to smear off. You would think its bad DV, but this is too soon to be bad. Could it be Transfer roller? Do I need to replace DV unit? 1 machine has 118k, 1 has 131k, and 1 has 262k. Please help.
Thanks
Mike

JR2ALTA
10-31-2014, 12:52 AM
your garbage toner has a different melting temperature than OEM. so when the pre-mix of toner from the bag runs through and it starts adding your garbage the problem begins

CompyTech
10-31-2014, 02:04 AM
Replace the drum and dv and dv unit and replace your toner with OEM at the same time.

Sent from my Nexus 7 using Tapatalk

Custom Search