agudmove
11-01-2014, 08:36 PM
I removed final part of waste toner pipe, before WTB, it was blocked with bits of black plastic, ( not hardened toner ), put back together and no noise, very happy with myself, 3 hour job. 2 days later customer reports noise again !!!
Has anyone come across this ?
methogod
11-02-2014, 09:17 AM
i have gotten black plastic in konica TN910 toner...
thanks fully it never made it out of the hopper into the dv unit, but it did block it up...
i have seen toner turn so hard it could be mistaken for plastic, put a lighter on it - see if it melts like toner or plastic.
are they using OEM toner?
good luck...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.