attempting to perform skew adjustment - following procedure in s/m, but i can't actually enter new skew values
1. Call the Service Mode to the screen.
2. Touch these keys in this order:
[Machine] -> [Skew adjustment] -> [Skew adjustment].
3. Select the color to be set.
4. Enter the skew value described on the new PH unit with the 10-key pad.
5. Touch [OK].
6. Proceed to [Skew adjustment reset].
at step 4, i attempt to enter new skew values on keypad but nothing changes, anyone know why?
1. Call the Service Mode to the screen.
2. Touch these keys in this order:
[Machine] -> [Skew adjustment] -> [Skew adjustment].
3. Select the color to be set.
4. Enter the skew value described on the new PH unit with the 10-key pad.
5. Touch [OK].
6. Proceed to [Skew adjustment reset].
at step 4, i attempt to enter new skew values on keypad but nothing changes, anyone know why?