lrockett
11-06-2014, 11:41 AM
Hello, Iīve just replaced transfer belt and 4 imaging units of a Bizhub C250. Initial prints had longitudinal clearer areas so Iīve cleaned all PH / laser units with the jig. After that all colors where fine and image perfect but now some sort o patterned background appeared. Itīs not a usual foggy background thatīs evenly distributed. You can see on the picture attached. This pattern is lighter on normal paper but is darker (like the picture) on thick glossy paper.
Iīve tried the following:
- Gradation and resolution adjutments
- Decreased D max density
- Decreased Background voltage margin to a less foggy background
Someone has some other suggestion for me to try? Thanks
2702727025
Iīve tried the following:
- Gradation and resolution adjutments
- Decreased D max density
- Decreased Background voltage margin to a less foggy background
Someone has some other suggestion for me to try? Thanks
2702727025