Parts source for Konica Minolta

[Jeff M.]

Looking for a reliable parts source for Konica Minolta. I need a CID for a C25, (I believe the PN is A2YFPP1100). Thanks. Jeff M.

[laitang]

Re: Parts source for Konica Minolta

Yes, part no. of CIS assy in C25 is A2YFPP1100

[Jeff M.]

Re: Parts source for Konica Minolta

Thanks. Appreciate the confirmation. Any idea where I can get one?

[dbrownlee]

Re: Parts source for Konica Minolta

Precision Roller - Printer Toner Cartridges, Parts and Supplies, Office Supplies, Electronics and Tools Don't have that p/n in their system but they can normally get just about any part.

[Jeff M.]

Re: Parts source for Konica Minolta

Yeah, I had looked on PR, and the part number didn't come up, so that's why I was looking for another source. Thanks.

[dbrownlee]

Re: Parts source for Konica Minolta

I'm pretty sure that it doesn't come up on the site because it hasn't been ordered from them before. Once you order one it will probably show up. I would give them a call. Good luck.
Dave

[Jeff M.]

Re: Parts source for Konica Minolta

Thanks, appreciate it.

[Copier Addict]

Re: Parts source for Konica Minolta

Why not call up a local KonMin dealer and ask if they can order it for you? Pretty sure it would be less expensive this way.

[Jeff M.]

Re: Parts source for Konica Minolta

Normally, that's what I would do, but the local KonMin dealer is somewhat less than helpful to other dealers..... and no, it's not just towards me! Why is Konica Minolta so difficult to get parts for? Doesn't seem like it should be this hard.....

[Cookr]

Re: Parts source for Konica Minolta

ARC Services Co. - Konica Minolta Copiers, Parts, and Supplies, Imaging Units, Toner and ACM Technologies, Inc. I have used both of them and precision.

[Jeff M.]

Re: Parts source for Konica Minolta

Thanks, appreciate the response. I didn't think of ACM. I'll try them first.