C552e with SSD 6.02n and A9 FW to G9 FW and SSD 6.05M

[habik]

Hello,

Had machine Bizhub C554e with older firmware GD1-A9. Upgraded machine with G20-G9 firmware which contains SSD ver 6.05M but only discovered, that it had SSD ver 6.02n during update as I thought judging from the A9 firmware that it already has SSD ver. 6.03M.

Now should I flash it with just SSD 6.03M and then re-flash it with G20-G9 or should I downgrade to GD4-A9 and then load the SSD ver 6.03 and then after update it with G20-G9 containing SSD 6.05M ?

Many Thanks for your advice, as I don't want to end up with dead machine. :)

Habik

Edit Bizhub C554e

[B0265]

I would upgrade the SSD firmware only to ver 6.05m.

[allan]

Have to do both of the last releases. 6.03 and 6.05 otherwise why does it not load 6.05 anyway?

[habik]

Have to do both of the last releases. 6.03 and 6.05 otherwise why does it not load 6.05 anyway?

Thanks Allan.

Sort of make sense. Just to clarify it would be better to downgrade to GD4 and then load SSD 6.03 and then the two pack G9 containing SSD 6.05, right?


Sent from my iDon't believe in marketing device using Tapatalk

[habik]

Loaded just the SSD ver.6.05m. All good.

Thanks Phil!

[habik]

Have to do both of the last releases. 6.03 and 6.05 otherwise why does it not load 6.05 anyway?


It actually loaded just the ver. 6.05m without any downgrades or middle update of ver.6.03. Thanks for your input Allan.