PDA

View Full Version : Miscellaneous Repetitive Defects Guage (Konica/Olivetti)


Custom Search


D Colour
11-13-2014, 04:12 PM
Hi all

Just wondering if anyone has such a thing for the Konica/Olivetti colour machines. Namely the Bizhub C224/284/364/454/554 (or Olivetti equivalent).

Its the repetitive defects gauge which helps you determine which item may giving you a problem. Kyocera seem to have such a thing, but i cant find anything similar in the Konica manuals.

Kyocera sample below.

27095

Do they not have such a thing? Or am I blind!? :cool:

Thanks


James

CompyTech
11-13-2014, 09:04 PM
Hi all

Just wondering if anyone has such a thing for the Konica/Olivetti colour machines. Namely the Bizhub C224/284/364/454/554 (or Olivetti equivalent).

Its the repetitive defects gauge which helps you determine which item may giving you a problem. Kyocera seem to have such a thing, but i cant find anything similar in the Konica manuals.

Kyocera sample below.

27095

Do they not have such a thing? Or am I blind!? :cool:

Thanks


James

Not sure about that but, Konica has a Troubleshooting guide that's written out a lot better IMO. Go to chapter 15 in the c284 series service manual, under K. Troubleshooting.

blackcat4866
11-14-2014, 12:01 AM
I know a few ...

95.7mm: drum
111.5mm: fuser
~1016mm: primary transfer

=^..^=

D Colour
11-14-2014, 10:13 AM
Thanks CompyTech, the Konica troubleshooting section is extremely detailed! But sometimes the simplest of ideas are the most useful.

Blackcat, super stuff, thank you, ill make a note of those!

Custom Search