View Full Version : konica 7020 error F26-1
wangchaoguis
04-28-2008, 03:11 AM
i don't have the konica 7020 sm, it displayed error F26-1, can you help me,thanks in advance.
wangchaoguis
doma873
04-28-2008, 10:31 AM
F26-1 is a L detect error for the dev. It could be a few things. First try a new dev and run l detect in 36 mode. If the error is still there try a TDS sensor. I have also have had the toner hopper not rotating also cause this code so chech that toner is being added. You can do this in 47 mode 01
If you need further instuctions on how to do this let me know
TDS sensor failed. replace the TDS sensor and developer and don't forget to run l-detect.
wangchaoguis
04-29-2008, 08:23 AM
thanks for your reply,doma873 ,CMB.
I will try it .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.