PDA

View Full Version : KM c353 TRANSFER BELT


Custom Search


visaliagraph
11-20-2014, 09:57 PM
I'm having trouble identifying what is ruining my transfer belts. (Total noob here by the way). Posted are a couple of pics of the issue. My transfer belts get worn on one side. I replaced it about a month ago and its bad again. Weird thing is it only prints bad from the bottom tray. When I print to tray 2 same size paper its fine. Thanks for anybody's help!

. 2717027171

JSC
11-20-2014, 10:44 PM
I'm having trouble identifying what is ruining my transfer belts. (Total noob here by the way). Posted are a couple of pics of the issue. My transfer belts get worn on one side. I replaced it about a month ago and its bad again. Weird thing is it only prints bad from the bottom tray. When I print to tray 2 same size paper its fine. Thanks for anybody's help!

. 2717027171

Looks like dev from the black iu to me.....

visaliagraph
11-20-2014, 11:52 PM
Looks like dev from the black iu to me.....

Right on the money JSC. Thank you. Time for new imaging units. $1400 for a set, cheaper anywhere else?

STACVB
11-26-2014, 02:48 PM
Toner Konica ?

allan
11-26-2014, 02:53 PM
Starts with a dirty charge unit on the tank.

visaliagraph
11-26-2014, 04:23 PM
Starts with a dirty charge unit on the tank.

Had a seal yanked out of the black IU. It was developer escaping. I had prolonged the life of the units by chipping thinking what's the worst that could happen ... this can. Live and Burn.

Custom Search