View Full Version : CQ Bizhub c364
T3chworkal
11-21-2014, 10:41 AM
Right! Having skewed prints only from tray 1 on this device, have changed feed tyres over to eliminate that but still twisted on either portrait or landscape and copy or print. is there a lead edge setting in service mode that may help with this or any other suggestions??
Thanks in advance
fixthecopier
11-21-2014, 01:43 PM
I would be looking for the edge of the paper hitting something coming out of the tray. Is there any type of mark or dent on the lead edge?
I have had a reg roller heavily coated with paper dust cause skew and wrinkles on a c550
T3chworkal
11-21-2014, 02:59 PM
I would be looking for the edge of the paper hitting something coming out of the tray. Is there any type of mark or dent on the lead edge?
I have had a reg roller heavily coated with paper dust cause skew and wrinkles on a c550
Yep, checked the path and all clear and no marks on lead edge
francisco
11-21-2014, 03:13 PM
take off registration rollers and verifie the bushings
i had same problem
blackcat4866
11-21-2014, 04:54 PM
Paper skew and flipped corner at leading edge rear, flipped back, intermittently. Unlatched transfer assembly at rear. Re-latch the transfer assembly.
=^..^=
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.