View Full Version : Error Code C-9402 on an all new C-284e ?
STACVB
11-26-2014, 02:38 PM
I know it's the exposure lamp, but if someone has another idea, I'm interested !!
Thanks :)
allan
11-26-2014, 02:47 PM
Replace and do warranty claim. installed a lot of those and no C-9402 yet. Does it light up? Could be CCD.
laitang
11-26-2014, 02:49 PM
• LED exposure unit (LU201)
• Flat cable (LED exposure unit)
• CCD board (CCDB)
• Scanner drive board (SCDB)
• Printer control board (PRCB)
• MFP board (MFPB)
blackcat4866
11-26-2014, 11:01 PM
If you already know what's the matter, what exactly are you asking? Should you fix it?
Maybe you'd like something easier to change than the lamp?
I don't get it. =^..^=
JR2ALTA
11-27-2014, 12:52 AM
did you remove the mirror locks?
copier addict
11-27-2014, 05:24 PM
If you already know what's the matter, what exactly are you asking? Should you fix it?
Maybe you'd like something easier to change than the lamp?
I don't get it. =^..^=
I'm pretty sure he is just asking if anyone has experienced this problem. It doesn't sound to me like he is looking for "something easier"
STACVB
08-11-2015, 09:45 AM
for this intermitant problem, it was the sun !
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.