burbug2
05-01-2008, 02:29 PM
how do you replace the fuser for the 5030n color printer i am not getting the correct pressure on one side. do you remove the back cover?
Necrocannibal
05-02-2008, 04:42 PM
Just open the back door that allows access to remove jams and pop it off, it just has two pegs on either side it hinges on. Then remove the two silver screws and it will pull straight out, very simple. :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.