twinax
05-01-2008, 06:51 PM
Hi Guy's,
I installed a new configuration with :
PF501 + C6500 + RU503 + LS501 (Stacker high capacity),
When I use the upper paper exit of LS501 I got an error code C-1303 (Fan3 error). I change it and also main board without any result!
The technical manual is wrong at this place, the FAN3 is in the middle of LS501, but in I/O control that's another one!
Did you already meet this problem?
Many thanks for yur help.
I installed a new configuration with :
PF501 + C6500 + RU503 + LS501 (Stacker high capacity),
When I use the upper paper exit of LS501 I got an error code C-1303 (Fan3 error). I change it and also main board without any result!
The technical manual is wrong at this place, the FAN3 is in the middle of LS501, but in I/O control that's another one!
Did you already meet this problem?
Many thanks for yur help.