PDA

View Full Version : Print quality issue Bizhub 423


Custom Search


wseyller
12-24-2014, 08:45 PM
Drum, dev unit, and developer have been changed. See pdf attachment. Asking this for another KM tech.

27494

blackcat4866
12-24-2014, 09:52 PM
You haven't said if this is a copy of a gray original, or a gray print.

I'm guessing that those bars are crossfeed, not in the feed direction. I suspect that you have a registration drive problem. The paper stalls, yet the drum keeps moving. You end up with image compressions.

Personally, I'd check the registration roller bushings. I've seen the registration roller bushings ovalled out, and the grease turned to tar. =^..^=

JR2ALTA
12-24-2014, 10:43 PM
Could be fuser all scored up

Pretty poor post for a tech of your stature wyseller

wseyller
12-24-2014, 11:46 PM
Its a grey print 11x17. And the pages have been folded up some and damaged a little. Mainly the black bars but it is also inconsistent throughout. I told the tech to do a half stop test and see if issue occurs before fuser. Sorry for the poor post. Its Christmas eve so I've had a lot on my mind. Just wanted to see what you guys thought.

Custom Search