View Full Version : KM C6500 what error you got ?
qantas
01-14-2015, 09:14 AM
Hi Mate,
When the Magenta Dev Unit died, what error code appear on the machine?
Does C-2422 ??
thks
dljorg
01-28-2015, 04:12 PM
2422 means there is something wrong there and there are lots of possibilities besides just junking the unit. I would dump the unit and try fresh developer first.
Main reason to replace the Dev Units on a C6500 is just too many cycles. Check the counters, they say to replace at 600K but most will go to a million. After that if there are problems of any type, codes or image quality, its time for a new part.
qantas
01-31-2015, 11:58 AM
Thanks mate,
Problem solved by replacing the Magenta Developer DV610M
The counter said its been only 20,000, but machine was totally off for 2 years
Will change the C and Y as well.
Cheers,
methogod
02-01-2015, 11:08 AM
what do you pay for Color DV units...
think i am paying too much
qantas
02-01-2015, 10:16 PM
I paid Original Konica Minolta from its dealer for $170 per unit .
Question:
when you put the new developer does the machine take the whole package ?
Mine still have left over, I stopped until it said fully charged successful.
should I repeat to force it to fill it more ?
thks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.