PDA

View Full Version : bizhub c224e network


Custom Search


finni72
02-03-2015, 09:55 AM
Hi.

Is there a way to reset the network card without entering the webbrowser or entering administration?
The machine is a little fucked up. He cant find an ip adress and whwn entering administration the network setting dows not show up.
The only error i get is "waiting for ARP-request"

This happend after i turned of the auto ip in network settings.

mrwho
02-03-2015, 10:05 AM
Have you tried the proper 5801 reset for the ncs?

Edit : ignore this. I was thinking of ricoh.

wseyller
02-03-2015, 12:28 PM
You just may need to give it more time but otherwise in service mode under initialization you can clear the network related portion.

sasa12u
02-03-2015, 01:25 PM
try to format the ssd.

finni72
02-03-2015, 02:13 PM
Thanx.

I will try it tomorrow.

menosmola
07-20-2016, 06:15 AM
Thanx.

I will try it tomorrow.
You solve this issue? if yes, How? :D same problem here...

copier tech
07-20-2016, 08:25 AM
Try updating the firmware & setting to function version 7 if not already.

Max
07-20-2016, 09:06 AM
You can reset network in service mode System 1, Initialization ,Network data

finni72
07-20-2016, 02:46 PM
I fixed the problem by putting a switch between the bizhub and the server.
The strange thing was that I could not communicate with the server even though I had set static IP with the correct subnet mask and Gateway.

Custom Search