PDA

View Full Version : konica c250 exit switch


Custom Search


DOE
02-03-2015, 06:14 PM
can you buy the konica c250 exit switch assembly by itself or do you have to buy a new fuser. the plastic was brittle and fell apart. i have replaced fuse so at least fusers second go around

Dickie
02-03-2015, 06:21 PM
Never been available in the U.K the best work around is to keep the old fusers from the chargeable calls and use them to either replace the whole unit or just use the exit flag.

Blizzoo
02-03-2015, 06:42 PM
I know just the exit sensor flag have a p/n.

DOE
02-06-2015, 04:18 PM
I know just the exit sensor flag have a p/n.

does anyone kn ow the part number for the flag for the c250 fuser. sorry but i dont have a parts manual. thanks

hotfuser
02-06-2015, 05:30 PM
does anyone kn ow the part number for the flag for the c250 fuser. sorry but i dont have a parts manual. thanks

the part number is 4038 5728 03 actuator

hotfuser
02-06-2015, 05:34 PM
Never been available in the U.K the best work around is to keep the old fusers from the chargeable calls and use them to either replace the whole unit or just use the exit flag.

the part became available as it is in the 2008 version manual

Custom Search