View Full Version : konica c250 exit switch
can you buy the konica c250 exit switch assembly by itself or do you have to buy a new fuser. the plastic was brittle and fell apart. i have replaced fuse so at least fusers second go around
Dickie
02-03-2015, 06:21 PM
Never been available in the U.K the best work around is to keep the old fusers from the chargeable calls and use them to either replace the whole unit or just use the exit flag.
Blizzoo
02-03-2015, 06:42 PM
I know just the exit sensor flag have a p/n.
I know just the exit sensor flag have a p/n.
does anyone kn ow the part number for the flag for the c250 fuser. sorry but i dont have a parts manual. thanks
hotfuser
02-06-2015, 05:30 PM
does anyone kn ow the part number for the flag for the c250 fuser. sorry but i dont have a parts manual. thanks
the part number is 4038 5728 03 actuator
hotfuser
02-06-2015, 05:34 PM
Never been available in the U.K the best work around is to keep the old fusers from the chargeable calls and use them to either replace the whole unit or just use the exit flag.
the part became available as it is in the 2008 version manual
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.